StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

ESL G3 Front Door Switch

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

ESL G3 Front Door Switch

Hi, 

Has anyone come across issue's when first powering on their ESL G3 Tape library. The library states "the front door switch hardware in module 1 is open". All doors are closed and locked. The only thing i can think of is the touch sensor at the top left corner isnt making enough contact. 

Anyone got any idea's?

Thanks 

1 REPLY 1
Highlighted
Trusted Contributor
Solution

Re: ESL G3 Front Door Switch

Hi

I have had this with the i6000, when i looked at the door i saw the bit that goes through the white sensor was bent back so it wasnt pussing the senor swotch in far enough. when i put a screw driver through the sensor the library came ready as normal.

you may just need to bend back the metal on the door itself