StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Fault 100 (soft) SCSI continous resets detected

 
Highlighted
New Member

Fault 100 (soft) SCSI continous resets detected

Any ideas?
This is showing up on my slave system. I have a MSL 6060 with a slave attached. The Master now does not see the slave. Nothing in the configuration changed.
1 REPLY 1
Highlighted
Valued Contributor

Re: Fault 100 (soft) SCSI continous resets detected

it should be a 4-digits error, 100X.
But, if it starts with 1 I would check cabling, make sure everything is firmly connected, if possible reseat cables.
If the master can not see the slave, I think there is a serial cable at the back that communicates both libraries.
Make sure as well from the front panel of each librar that they are set to be Master and Slave respectively
If the flop doesn't fit... go allin!!!