StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP EML 71e Inoperative - Failure during initializaion

 
SOLVED
Go to solution
Highlighted
Occasional Advisor

HP EML 71e Inoperative - Failure during initializaion

Hi,

 

After a power outage library fails. Command View TL  alert log contains the following errors:

 

1) Disabling Secure Manager Feature because a management path could not be found for the following devices: ROBOT HU88051003; DRIVE HU10740CLW; DRIVE HU10740CLR; DRIVE HU10740CRM; DRIVE HU10739LER
2) Secure Manager inoperative - One or more interface controller device map(s) are out of synchronization with the access control settings. Please run the "Synchronize" action available on the Secure Manager page.
3) IFM drive event and the Library state is unknown.
4) Robot initialization  failed
5) IfmInitThread:Failure to Initialize...reason==Robot initialization failed - GOING INOP
6) Director - initResponse() Initialize: failed init of reach and grip.; scanUserFirmwareCheck(): Version OK, scanVersion=*E1022 RS TTL SXX_302E CPU 1.1*; End of Text

 

How to solve the problem?

2 REPLIES 2
Highlighted
Acclaimed Contributor

Re: HP EML 71e Inoperative - Failure during initializaion

Consider to ask hp support for help. This could be difficult to troubleshoot. Maybe a component is damaged.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Advisor
Solution

Re: HP EML 71e Inoperative - Failure during initializaion

Hello
The problem was solved reinstalling all the boards of the library.
After switching the initialization was successful.