HP LTO 4 Drive in Quantum Superloader 3

[Ryan Land]

I have an HP LTO4 Drive in my Quantum Superloader 3 on an HP DL380 G4 using the onboard external SCSI adaptor that is also used for my internal RAID config. I have replaced and LTO robot and drive with this one and it worked fine on this with the old Overland Storage LTO 2 system. I need to get the new one going but I only get the tape drive to show up in my Device Manager. I need to know if anyone has any ideas other than the one that I saw that said you can't do this because I know that it can be done because our old system was running on it. Thanks for any feedback.

Ryan

[TapeDrive Killer 1 2]

Autochanger mode needs to be set on random

Pablo Alvarado Siles

[Wolfgang Broecker]

I have the same problem here. The library is set to random mode, but is not in the Device Manager. Only the LT0-4 Drive is shown in the device manager. Any suggestions?