StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP MSL6000 blinks orange

 
Highlighted
New Member

HP MSL6000 blinks orange

Hello,
we have new HP MSL6000, but it doesnt work. Front led is orange blinkig, touschscreen is black and RS232 doesnt responds.
We just recived it, and its without tape reader.

Does any body knows why it doesnt work ?

With best regards Pavel Kral
4 REPLIES 4
Highlighted
Trusted Contributor

Re: HP MSL6000 blinks orange


Hi Pavel,

If the library is a new one then before powering it on we will have to remove the shipping locks if you have not pulled out.

Then once you have powered it on for the first time, you will have to do certian basic settings in the OCP for it to understand the settings.

More information required is available in the user guide in the 3rd chapter

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01381698/c01381698.pdf?jumpid=reg_R1002_USEN

Hope this helps

Regards
Raj
Regards

Raj

How to assign points? Click the KUDOS! star!
Highlighted
New Member

Re: HP MSL6000 blinks orange

Hi Ray,
thank you for your reply.

Yes, our library is new, but I din't find any shiping locks. Where exactly are ?

Touch screen is black and doesn't responds on touching, so I cannot do certian basic settings.

With best regards
Pavel Král
Highlighted
New Member

Re: HP MSL6000 blinks orange

Hello Pavel,

I have the same problem, except we've had ours for about 5 years with no problems until about 6 months ago when it started with that blinking amber light and nothing on screen. Please post your fix if you find one.

Thanks,

Custer
Highlighted
New Member

Re: HP MSL6000 blinks orange

Hello Custer,
I have no good news for you, we returned that trash to the reseler.
What we have discovered:
- Its just renamed Overland http://www.overlandstorage.com/US/products/archive.html , so you can use tham support, firmware and so on.
- Wa was able with some Windows SW from HP load (using serial line) in new firmware from Overland and than we was able to log in to http admin, but we wasnt able to do anythig there. Only view some logs.

Good luck