StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP StorageWorks 1/8 G2 Tape Autoloader Mechanical Block : 8C 08

 
Highlighted
New Member

HP StorageWorks 1/8 G2 Tape Autoloader Mechanical Block : 8C 08

I am getting a Mechanical Block 8C 08 with right magazine ejecting automatically.

2 REPLIES 2
Highlighted
Trusted Contributor

Re: HP StorageWorks 1/8 G2 Tape Autoloader Mechanical Block : 8C 08

Hard to say for sure whats causing it, but i cleaned the sensor on the bottom of the picker and has fixed it.

Highlighted
New Member

Re: HP StorageWorks 1/8 G2 Tape Autoloader Mechanical Block : 8C 08

Hi,

 

I am also got the same problem. Today resolved this issue by rotate and moving liberary to the edge of the track.

First switched off the robotic liberary

rotate the liberary and move parallal to the track and edges are in same level. then powered on the liberary.

It works for me.