StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP StorageWorks autoloader with Legato

 
Highlighted
Occasional Contributor

HP StorageWorks autoloader with Legato

The server is a Proliant DL385 G2, running Windows Server 2003.
We installed an HP StorageWorks 1/8 G2 Tape Autoloader Ultrium-3 SCSI, connected to a PCI-X HP SC44Ge Host Bus Adapter. Installed EMC Legato Networker 7.2 (later upgraded to 7.3).

I was sure that my colleague was able to configure Legato to recognize the autoloader.

We decided to move the card and autoloader to another server and uninstall Legato, but that plan did not go through, so we reinstalled them back to the original server.

I reinstalled Legato and I ran the INQUIRE command and get the following:
Error in nt_lus_get_inquiry; error was 1
Incorrect function.

scsidev@0.0.0:TEAC DW-224E-R C.AC|CD-ROM

I was trying to setup the autoloader as a jukebox using the JBCONFIG command. Tried to setup the jukebox as a Microsoft Removable Storage Jukebox, but got this error:

jbconfig: Jukebox error: Could not start a Removable Storage session

Any ideas?
2 REPLIES 2
Highlighted
New Member

Re: HP StorageWorks autoloader with Legato

David
I experienced the exacty same error. Did you find a solution?

Error in nt_lus_get_inquiry; error was 1
Incorrect function.

scsidev@0.0.0:TEAC DW-224E-R C.AC|CD-ROM
Thanks,
Tom Long



Highlighted
Occasional Contributor

Re: HP StorageWorks autoloader with Legato

Hi Tom,

We finally found the cause of the error.
The tape loader is not recognize by Legato because of a Microsoft patch that is included with SP2 (KB916048).

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3319912&prodTypeId=12169&objectID=c01151607

We decided to reinstall Windows and install all the hotfixes (excluding the one above) to make it nearly at SP2 level.

Good Luck.

David