StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

LTO-1 firmware repairing after unsuccessfull FW upgrade

 
Highlighted
New Member

LTO-1 firmware repairing after unsuccessfull FW upgrade

Hello, dear colleagues!

Does anybody know how to restore firmware of the LTO-1 tape drive after unsuccessfull attempt to upgrade firmware?
Before that drive was fully functional. Now it turns all it's leds on and does nothind more. It seems the firmware is corrupted. Drive has 9-pin RS422 port at the rear panel, may be it can be used to flash eeprom with the correct firmware. May be some other service ports on the PCB inside the drive. Any ideas are welcome...
May be anybody of you have faced such a problem, and know the solution.
Thank you!

Best regards,
Sergey