MLS6000 Tape Library

[McLeanIT]

Updated the library to a Ultrium 4 drive. Followed all instructions. Works fine. However if I look at the "Status" on the drive is say's Ultra 160. Should be Ultra 320. The server does have a LSI Ultra320 card. Any help is appreciated.

[TapeDrive Killer 1 2]

Problem is the server bay that it is not 133MHZ
Move the SCSI controller to an expaision slot that it is 133MHZ
What server do you have ?

Pablo Alvarado Siles

[McLeanIT]

It is an HP Prolient DL320

[McLeanIT]

When you say the controller, are you refering to the SCSI card in the PCI slot, or something else. Thnk you.

[TapeDrive Killer 1 2]

No Im refering to the expansion slot on the server

Pablo Alvarado Siles