HPE Community
StoreEver Tape Storage
1752794 Members
5652 Online
108789 Solutions
New Discussion

MSL 2024 - Error Tape

 
SOLVED
Go to solution
portoporto
New Member

‎04-28-2011 05:38 AM

‎04-28-2011 05:38 AM

MSL 2024 - Error Tape

Hi to all. I have a problem. I have a MSL 2024 tape with inside 24 HP tapes Lto4. When I try to charge one tape in the driver1, the tape library, after a bit of time, give me en error: Media error. In the mail log I can read:

11.04.28 14:42:34.03 Attention: Crit or Warn Drive Tape Alert flag
Number: 0x15, 21
Drive number: 0x01, 1
Tape Alert Flag: 0x04, 4

and also:

11.04.28 14:42:48.03 Library Error - ME: invalid cartridge
Global error code: 0x63, 99
Module error code: 0x00, 0
Current command: 0x17 - phy move
Task originator: 0x0F - rmu
From: 0x02 - storage slot
Number: 0x16, 22
To: 0x04 - tape drive
Number: 0x01, 1

I try to clean the driver1 but nothing.
Thank you
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-28-2011 06:09 AM

‎04-28-2011 06:09 AM

Solution

Re: MSL 2024 - Error Tape

You should install LTT and pull a support ticket.

http://www.hp.com/support/tapetools

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.