MSL 4048 drive sled not present

[edwarsayegh]

i upgrade our MSL 4048 with LTO 8 drive half hight and insall it in the 3rd bay so the configuration as below

1-2 LTO 4 drive

3- LTO 8 drive

4- Empty

the problem is i installed the LTO 8 drive in the 4th bay then i remove it and install it in 3rd bay

the MSL give me error that Drive 3 is missing but i donot have drive to install 

how can i remove this drive from the MSL so i can have only Drive 1 and 2 only

[tapelibraryfixr]

The drive hasnt been removed properly im guessing.

try putting the drive back into slot 3, then power the drive down from the front panel or gui, then remove the drive and insert into slot 4

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c01521401