StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: MSL 4048/SCSI and AIX 5.3

 
Highlighted
Occasional Advisor

MSL 4048/SCSI and AIX 5.3

Hi, i have a MSL 4048 Library connected to IBM server with AIX 5.3.

How can I manipulate the robot with AIX 5.3?


Thanks in advanced.

7 REPLIES 7
Highlighted
Respected Contributor

Re: MSL 4048/SCSI and AIX 5.3

Ur using any backup software in Ur system (AIX 5.3).

Because CLI mode is very critical manipulate the robotic arm, best way U using (IBM Tivoli Storage Manager or HP Data Protector) software.



Highlighted
Occasional Advisor

Re: MSL 4048/SCSI and AIX 5.3

No, im not using Data Protector or Tivoli, i need to know,

if can i use the robot without data protector or tivoli software?

thanks
Highlighted
Respected Contributor

Re: MSL 4048/SCSI and AIX 5.3

Hi Muro,

U can control robotic arm by IBM AIX 5.3, but U can not take any backup.

Thanks--Yaqub
HP Support!!!
Highlighted
Occasional Advisor

Re: MSL 4048/SCSI and AIX 5.3

Do you know where i can find some papers about this?

Then, i cant use my library without a DP or Tivoli?

I need use the library and robot, but i dont have DP,symantec NB,TSM :(

Thanks
Highlighted
Respected Contributor

Re: MSL 4048/SCSI and AIX 5.3

Hello Muro,

Why U need use a tape library, because U take file system & database (RMAN) backup. Without any backup software how U use tape library.

I am really sorry, I can not any help for this issue.

Thanks--Yaqub
Highlighted
Occasional Advisor

Re: MSL 4048/SCSI and AIX 5.3

with the msl 4048 in sequential mode all ok

its work for me, the robot move the tape in mode sequential, 1,2,3,4...48.

if you want try move the robot with aix, you will need mtx and generic scsi driver(GSC).


http://wiki.zmanda.com/index.php/How_To:Install_Amanda_Server_on_AIX

GSC
ftp://ftp.feral.com/pub/aix/gsc.tar.gz

mtx
http://mtx.opensource-sw.net/

Highlighted
Occasional Advisor

Re: MSL 4048/SCSI and AIX 5.3

with the msl 4048 in sequential mode all ok

its work for me, the robot move the tape in mode sequential, 1,2,3,4...48.

if you want try move the robot with aix, you will need mtx and generic scsi driver(GSC).


http://wiki.zmanda.com/index.php/How_To:Install_Amanda_Server_on_AIX

GSC
ftp://ftp.feral.com/pub/aix/gsc.tar.gz

mtx
http://mtx.opensource-sw.net/