HPE Community
StoreEver Tape Storage
1753722 Members
4570 Online
108799 Solutions
New Discussion юеВ

Re: Msl 4048 tape library

 
degaul nkunga
Occasional Contributor

тАО09-08-2009 06:35 AM

тАО09-08-2009 06:35 AM

Msl 4048 tape library

you're powering on for the first time, when could you plug in the host server and all attached devices to the library?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО09-08-2009 07:21 AM

тАО09-08-2009 07:21 AM

Re: Msl 4048 tape library

Rule of thumb: First plug in the cables, then power on.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Nava Murali
Occasional Advisor

тАО09-08-2009 05:13 PM

тАО09-08-2009 05:13 PM

Re: Msl 4048 tape library

Following the thread,
plug in step : follow above advice.
Boot up : boot the library to ready state first before the host server.

-nava-
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.