HPE Community
StoreEver Tape Storage
1753768 Members
5565 Online
108799 Solutions
New Discussion юеВ

MSL'S Error

 
ZoiloG
Occasional Contributor

тАО06-10-2009 12:21 AM

тАО06-10-2009 12:21 AM

MSL'S Error

Hi all,

I have one configuration master-slave with with three MSL5052S2 and sometime can see the follow error in the master:

"Some modules have not been detected during the physical inventory.
Some possibles causes are:
a)A defective sensor opto sensor in the module.
b)The module is not properly attached to XpressChannel hardware.

please,any help would be welcome

Thanks in advance
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО06-10-2009 03:34 AM

тАО06-10-2009 03:34 AM

Re: MSL'S Error

The master detects the slaves by 2 methods:

1) over ethernet connection between the library controllers.

2) by "sensing" the boxes using the "elevator" (PTM). Maybe one of the sensors has a problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
ZoiloG
Occasional Contributor

тАО06-10-2009 05:40 AM

тАО06-10-2009 05:40 AM

Re: MSL'S Error

Hi Torsten,

The problem can be in the PTM sensor of master?
Several times only detect the first slave and all times no detect de second slave, I changed the second slave complete.

Over ethernet not problem.

Thanks
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.