StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL2024 960FC Tape Library

 
SOLVED
Go to solution
Highlighted
Regular Advisor

MSL2024 960FC Tape Library

Has anyone see the message "recovery" display in the OPC screen after loading in a magazince? I have not been able to located any documentation to tell why it would display that message.

Library Firmware Version 3.30/2.40e
Tape Drive Firmware Version M63W
3 REPLIES 3
Highlighted
Honored Contributor
Solution

Re: MSL2024 960FC Tape Library

you can read here the meaning of "Recovery" on the OCP of the MSL2024

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1238732


marino
Highlighted
Regular Advisor

Re: MSL2024 960FC Tape Library

I found out the answer to my question. If the small plastic clips are missing on a cell of the magazine, the tape library has problems inventorying what tapes are in what cell. Once we replaced the missing clip, all was well again.

Can the clips be purchased separately?

Highlighted
Honored Contributor

Re: MSL2024 960FC Tape Library

Sorry for delay in answering, I think you already got the answer from HP directly, in case here is the answer:
no this small plastic part is not orderable, you need to order the magazine

marino