1748183 Members
3601 Online
108759 Solutions
New Discussion

Re: MSL2024 RMI

 
SOLVED
Go to solution
Learner2Learn
Visitor

MSL2024 RMI

Hi

Hope you all safe and well.

Just a Q regarding on how to connect to the MSL2024 RMI

1. Poweron 2024, after (rack mount, remove shipping lock, etc)

2. Set admin password via the OCP. (no default password)

3. Plugin ethernet cable to the 2024 ethernet port and to laptop

4. Open browser (Chrome, etc)

5. Enter library default IP (OCP>find default IP>Network Screen) 

6. Open browser - type> https://xxx.xxx.xxx.xxx (do I add /80) or no?

7.  Select account type: Administrator (password if required)

8. Configure the 2024 network setting, etc... 

Q: When adding the network configuration does the deault IP address change to the new IP address, so the new assigned IP address will be use next time to connect to the RMI?

Q: Must I do firmware upgrade as well if not on the current? (link contract) (can do from RMI or OCP-from usb)

Q.. Which firmware file is the correct one for the 2024 / drives? I see there is frm and frm.sig

LTO6 : LTO_6250_35PW_MSL-G3-Series.frm and LTO_6250_35PW_MSL-G3-Series.frm.sig 

2024:  MSL2024_7.20.frm and MSL2024_7.20.frm.sig

Thank you in advance, and be safe.

 

 

 

 

6 REPLIES 6
tapelibraryfixr
Trusted Contributor

Re: MSL2024 RMI

Q: When adding the network configuration does the deault IP address change to the new IP address, so the new assigned IP address will be use next time to connect to the RMI?  Yes

 

Upgrade the firmware through HP LTT if you are able.

Learner2Learn
Visitor

Re: MSL2024 RMI

Dear Tapelibraryfixr

Many thanks for replying to my message, apprecited!

I will downloaded the HP LTT already... 

Which are the correct libray & drive firmware files that must be selected? fmr or fmr.sig

Thank you once again.

Greetings and be safe.

 

tapelibraryfixr
Trusted Contributor
Solution

Re: MSL2024 RMI

Hi

HP LTT will choose the correct firmware for you.

As long as you have a support contract it will allow you to download the firmware.

 

.fmr is correct

Learner2Learn
Visitor

Re: MSL2024 RMI

Dear Tabelibraryfixr

Many many thanks for answering again, highly appreciated!

Regards

GaVB
Occasional Visitor

Re: MSL2024 RMI

Hi

after setting the administrator password and getting the default IP via OCP, can you already connect via the network to the TL ethernet port via the browser to the TL RMI?

Thank you

Torsten.
Acclaimed Contributor

Re: MSL2024 RMI

Consider to open your own thread.

Such hijacking of threads is always confusing.

 

However, the default setting is DHCP. You can set your own fixed address using the front panel. Then you can connect via "normal" network connection.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!