HPE Community
StoreEver Tape Storage
1753503 Members
4813 Online
108794 Solutions
New Discussion

Re: MSL4048 Robotic path not being detected by OS

 
Yaboto
Super Advisor

‎05-07-2012 07:32 AM

‎05-07-2012 07:32 AM

MSL4048 Robotic path not being detected by OS

Hi,

 

I am able to detect the drives of my MSL4048 but I am not able to de detect the Library robotic path at the OS level.

 

Please help.

 

Berenger

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎05-07-2012 08:51 AM - edited ‎05-07-2012 08:52 AM

‎05-07-2012 08:51 AM - edited ‎05-07-2012 08:52 AM

Re: MSL4048 Robotic path not being detected by OS

Check if the library is in SEQUENTIAL mode, set the mode to RANDOM.

 

But maybe the robotics is just UNKNOWN to your OS because of a missing driver.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Yaboto
Super Advisor

‎05-08-2012 03:26 AM

‎05-08-2012 03:26 AM

Re: MSL4048 Robotic path not being detected by OS

 

Please I am using Red Hat Enterprise Linux 5.4 as OS. Please what drivers can I use ?

 

Thanks

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.