StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL4048 stop and start procedure through HPE Command view MSL

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

MSL4048 stop and start procedure through HPE Command view MSL

Dear All,

can any one provide me details of MSL4048 stop and start procedure through HPE command view MSL.

 

thank you,

8 REPLIES 8
Highlighted
Trusted Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

Hi

not really sure what you mean?

Highlighted
Occasional Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

Hi,

i need  procedure to stop and start MSL4048 tape library.

Thank you

Highlighted
Trusted Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

what backup software do you use?

Highlighted
Occasional Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

HP Data protector.

Highlighted
Trusted Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

Well first thing to do is to make sure its not running any backup jobs. once the jobs have finished running then the library has stopped.

What are you wanting to do with the library?

 

Highlighted
Occasional Contributor

Re: MSL4048 stop and start procedure through HPE Command view MSL

Hello,

Thank you for your replay.

we are going to shutdown the Data Center. so i need to shutdown all the servers during the activity. so i need to do shutdown tapelibrary server remotly after backup server shutdown. 

after login to the " HPE command view " there is no option to shutdown, so i need to know the procedure for remote shutdown insted of manual shutdown.

Thank you.

Highlighted
Acclaimed Contributor
Solution

Re: MSL4048 stop and start procedure through HPE Command view MSL

IIRC you can only reboot from remote, for shutdown and start press the power button.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted

Re: MSL4048 stop and start procedure through HPE Command view MSL

The MSL4048 is powerfail safe at all times, even during motion.  Tape drives should not be power cycled when a tape is loaded but are power safe when the drives aren't reading/writing.

When a remote power down will occur the recommended procedure is to make certain that all of the tape drives are unloaded and the library is idle then pull the power.


I work for HPE

Accept or Kudo