HPE Community
StoreEver Tape Storage
1753401 Members
7144 Online
108792 Solutions
New Discussion юеВ

Re: MSL4048

 
SOLVED
Go to solution
inex
Super Advisor

тАО11-11-2009 10:06 AM

тАО11-11-2009 10:06 AM

MSL4048

Hi,

After upgrading code on an MSL4048 to the latest version 7.00, the password on the web utility/administrator does not work. And the password on the ocp (8 times 0) does not work either. Any ideas...

-inex
0 Kudos
Reply
4 REPLIES 4
Torsten.
Acclaimed Contributor

тАО11-11-2009 11:11 AM

тАО11-11-2009 11:11 AM

Solution

Re: MSL4048

I would try to set a password on the OCP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
inex
Super Advisor

тАО11-11-2009 11:15 AM

тАО11-11-2009 11:15 AM

Re: MSL4048

But old password 8 times 0 does not work.

-inex
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО11-11-2009 11:26 AM

тАО11-11-2009 11:26 AM

Re: MSL4048

Can you set the password on OCP? If not, give HP a call, they can provide you a temp. password.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
inex
Super Advisor

тАО11-11-2009 11:30 AM

тАО11-11-2009 11:30 AM

Re: MSL4048

ok, thanks.

-inex
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.