StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6000 - E1200 bridge

 
SOLVED
Go to solution
Highlighted
Super Advisor

MSL6000 - E1200 bridge

Hi,

We have MSL6000 with LTO-4 drives and E1200 scsi to fc bridges. I believe the latest fw fro these bridges is 5.9.44. Were do I find it and how do I donwload th fw?

13 REPLIES 13
Highlighted
Honored Contributor
Solution

Re: MSL6000 - E1200 bridge

The easiest thing tgo do is probably download Library and Tape Tool. There is a web update feature that does out and grabs the latest firmwares for all tape/library devices.

From there, you can also update the firmware with the utility.

Here are the Windows Downloads...

" http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1849280&prodTypeId=12169&prodSeriesId=316040&swLang=8&taskId=135&swEnvOID=1005 "


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Highlighted
Super Advisor

Re: MSL6000 - E1200 bridge

Can I also do the E1200 bridge from that utility?
Highlighted
Honored Contributor

Re: MSL6000 - E1200 bridge

Yes, provided that the controller LUN is mapped. If not, you could map it (temporarily) to the server running LT&T or update the E1200 via FTP.
.
Highlighted
Super Advisor

Re: MSL6000 - E1200 bridge

what is controller lun?
thanks - inex
Highlighted
Honored Contributor

Re: MSL6000 - E1200 bridge

It is a special SCSI LUN that represents the E1200 module so that a host can talk over Fibre Channel to it. I don't have the documentation with me, but I think the E1200 user interface calls it "AF".
.
Highlighted
Super Advisor

Re: MSL6000 - E1200 bridge

Hi Everybody.

Thanks for your help.
Highlighted
Super Advisor

Re: MSL6000 - E1200 bridge

Hi,

Is this really the right code for the NSR 1200-160?
I managed to download the code into the bridge through serial connection, and it asked for cold reboot. After doing that the bridge seems a bit dead... There is light in fc port, but I cannot contact it through the serial port.

When I read the release notes for the files, I see that the code is for StorageWorks Network Storage Router n1200-320, but I do not see the n1200-160 unit in there.

-inex