msl6030

[ess]

HI All
I have 1 msl 6030 and 1 tape drive model 960 u3.
i need one tape drive add to slot 2 but when install tape drive 2; tape drive 1 go to mode initialize.
both tape drive is safe.
please help.
this autoloader one e1200-320 4gb fc interface card available

[Torsten.]

Please tell about your cabeling!

[Patrick Terlisten]

Hello,

sounds like a misconfiguration. Check this doc for the right cabling.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=316040&prodTypeId=12169&prodSeriesId=316040&objectID=c00023651

Regards,
Patrick

[ess]

hi
tanks for help.
i check this cabling but not resolve the problem.

[Rob Leadbeater]

Have you gone through the options on the front panel to get it to scan for the new drive ?

Cheers,
Rob

[ess]

hi
yes i go to ocp and scan new drive but not found any new device.
so the problem is stable.
tanks for the best help.

[Torsten.]

Again, Please tell about your cabeling!

Should be

NSR -> tape -> terminator

NSR -> lib ctrl -> tape -> terminator

[ess]

hi
yes the cableing is the your sample say you.