HPE Community
StoreEver Tape Storage
1753720 Members
4939 Online
108799 Solutions
New Discussion

Re: MSL8096 barcode reader problems

 
Jeremy C
Regular Advisor

‎12-20-2013 05:24 AM

‎12-20-2013 05:24 AM

MSL8096 barcode reader problems

MSL8096 is reading a lot of barcodes wrong.  For some it will just put the question mark icon.  For others it thinks it read the barcode but the label that Data Protector shows will have a few characters wrong.  

 

Any advice?

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-20-2013 06:02 AM

‎12-20-2013 06:02 AM

Re: MSL8096 barcode reader problems

You either have bad labels (check them) or a bad reader.

Unfortunately the robot is no longer a spare part, now you need a new chassis ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.