HPE Community
StoreEver Tape Storage
1752511 Members
4818 Online
108788 Solutions
New Discussion юеВ

Re: Q1595B and SCSI cable

 
SOLVED
Go to solution
rober sakharin
Occasional Contributor

тАО01-01-2008 12:56 AM

тАО01-01-2008 12:56 AM

Q1595B and SCSI cable

What king of Scsi cable should be in Shelving, Mounting and Grounding Kits (Q1595B),does it need a terminator.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО01-01-2008 11:55 PM

тАО01-01-2008 11:55 PM

Solution

Re: Q1595B and SCSI cable

The cable depends on the HBA, the "drive side" is 68 pin high density.
The terminator is built-in.
If you open the cover you can see 4 internal cables with a terminator on each end.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
rober sakharin
Occasional Contributor

тАО01-05-2008 05:00 AM

тАО01-05-2008 05:00 AM

Re: Q1595B and SCSI cable

thanks
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.