StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Tape Library Setup - Windows

 
Highlighted
Occasional Advisor

Tape Library Setup - Windows

I'm using 6.0. It's been forever since I've had to do anything with configs. Can someone point me to the doc that best describes how to set up a new device library? All the way down to a test backup to tapes in the new library - would be best. Thanks, -h
2 REPLIES 2
Highlighted
Honored Contributor

Re: Tape Library Setup - Windows

You will probably get the best support if you post into the Data Protector specific forum as it sounds like you must be using DP.

A starting point would be to check the tape teams documentation which is all at http://www.hp.com/go/ebs (EBS == Enterprise Backup Solutions). On that site you can find lots of helpful docs and there was a DP setup guide last I looked.
Highlighted
New Member

Re: Tape Library Setup - Windows

Hi Mike,

If it's regarding DP6 then you can:

1. check docs at HP Data Protector V6.1x Software Manuals site http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=10008&contentType=SupportManual&docIndexId=64180&prodTypeId=18964&prodSeriesId=3889913

2. the easiest way to get help is to using online help inside DP - it has all the documentation inside. Just go to Help menu.