StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Ultrium 960 not found on HP e1200-320 4G Interface Controller !!

 
Highlighted
New Member

Ultrium 960 not found on HP e1200-320 4G Interface Controller !!

Hi y'all,

I have the following problem!
We use an Library with 1 drive and 1 fibre card.
Arcserve as backup software.
Without any reason the drive is no longer found by the fibre card and the backup software?

This is an Error from the Report created bij the webinterface of the e1200-320 card.

SCSI Bus 0 Devices

Bus Tgt Lun Type Status Xrate Speed Offset Width Flags IDP Maps Device Description
0 0 0 CHGR UP 20 15 WIDE 0x00 0 1 HP MSL6000 Series 0520
0 1 0 TAPE DOWN -- -- -- -- -- -- 1

Virtual Devices

Type State Map Cnt LUN ID Device Description Serial No.
CTLR UP 0 0 HP NS E1200-320

ps: does anybody know the default user and password for the E1200-320 card??
2 REPLIES 2
Highlighted
Frequent Advisor

Re: Ultrium 960 not found on HP e1200-320 4G Interface Controller !!

Default user is: root
Default password is: password

User guide for this device is available online:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&contentType=SupportManual&docIndexId=64255&prodTypeId=329290&prodSeriesId=3550729〈=en&cc=us
Highlighted
New Member

Re: Ultrium 960 not found on HP e1200-320 4G Interface Controller !!

Hi..


thnx for the relpy. It seems that the E1200 card was defect and we had it replaced..

thnx again..