Windows Server 2008 x86 driver for HPE LTO-6 drive

[itadmin8008]

Hi!
I'm looking for an HPE LTO-6 driver for Windows Server 2008 x86.

The HPE LTO-6 drive will be installed in a tape library and used from an HP server running under Windows Server 2008 x86.

I've found that driver: https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5336448&swItemId=co_176346-1&swEnvOid=4184#tab1 but it seems to me that it is only for x64 versions of Windows.

And I cannot figure out how to find older versions of that driver.

I would appreciate any help on that.

[Preethi_C]

Hi,

Please refer to the following web pages:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_eb39bdd2fa074c218499c52127#tab-history

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_ac1ab49d3fc8471496fd1e4eed&swEnvOid=4168#

You can also refer to the tab "revision history" to check for older versions.

Regards,

Preethi.

I work for HPE!
If you feel this was helpful please click the KUDOS! thumb below!

[Moderater Note: Borken link has been replaced]

[itadmin8008]

Hi Preethi!

I thank you for your answer and the web pages links.

However the web page for the Windows drivers refers only to the x64 version of Windows Server 2008 R2. I still cannot find the driver for the x86 version of Windows Server 2008 (not R2).

Revision history goes back only to the 21st of October 2016.

Regards,

Jean-Christian