Wrong driver

[dctw]

Hi,

Would really appreciate your help here.

I'm using MSL6000 Series Tape Library and the driver picked up in the system was incorrect.

It should be schgr but went to pick up sctl instead.

I've tried to remove the system file and ioscan it and it still pick up sctl.

FYI, this library is shared with a few servers but there's no issue for other servers.

Is there anything that I can do?

FYI.

Wrong driver :
---------------------------------------
% ioscan -fnC autoch
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
autoch 1 1/0/4/1/0/4/0.1.15.255.0.0.0 sctl UNCLAIMED UNKNOWN HP MSL6000 Series
---------------------------------------

It should be :
---------------------------------------
% ioscan -fnC autoch
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
autoch 1 0/0/10/1/0/4/0.1.15.255.0.0.0 schgr CLAIMED DEVICE HP MSL6000 Series
/dev/rac/c13t0d0
---------------------------------------

[Torsten.]

Duplicated thread ...

Did you check if "schgr" is already in the kernel?