StoreOnce tools configration

[AhmedAlbatoosh]

Hello everyone,

I'm looking for a tool that allows me to configure a new HPE StoreOnce system. Ideally, it should provide insights into system performance, storage capacity, and other storage-related and system settings.

If such a tool exists, could you please share the name and download link?

Thank you!

[Ryan247Zook]

Hello!

To configure a new HPE StoreOnce system, you'll primarily use the web-based HPE StoreOnce System Management Console (GUI), which is accessed via a web browser using the system's IP address. This integrated tool provides insights into performance, capacity, and system settings. For command-line access, use the HPE StoreOnce CLI via SSH. No separate download is needed for either interface; refer to the HPE StoreOnce documentation for access instructions and guides.

[sbhat09]

Hello @AhmedAlbatoosh,

Here you go - https://d3dnjd32bdhgco.cloudfront.net/storage-sizer

NinjaStarts is the tool you may find useful.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[sbhat09]

Above one is the online version.

You can download the tool from this link - https://saf.hpe.com/safanalyse/#!/dashboard

Follow the ellipses on right hand top corner and then 2nd from the top

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[AhmedAlbatoosh]

thank you for your feedback ..

but out modele of SO 5260 is'nt have SSH cli login we can't do via CLI any config.

if you hasv eany documnent for SO 5260 Share with us 

[AhmedAlbatoosh]

thank you for your replay, 

 but the tool support the storeonce configration 

[sbhat09]

StoreOnce Gen4/Gen4+ (including 5260) don't have CLI feature. CLI/SSH connectivity is not possible.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[sbhat09]

Yes, NinjaSTars supports StoreOnce configuration.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[Gans_Tapes]

@AhmedAlbatoosh  For the initial setup/configuration of StoreOnce G4 or G4+, there's a console account login (over putty) that allows you to configure the basic management network settings. Once the network is operational and access the IP via browser and you'll be redirected to the first time setup wizard that guides you through the remainder of the process to fully configure the StoreOnce. 

For telemetry data, the StoreOnce has dashboards, graphs and events that can be either viewed over GUI or you can capture reports over email.  

Links / References: 

StoreOnce first time setup wizard - https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003761en_us&page=GUID-70C83E97-46A8-4ECA-AC9C-88207ADC21DD.html

Dashboards - https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003761en_us&page=GUID-5CCEEF55-A1FD-4CB5-B1D4-1ED53ADEF862.html
Reports - https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003761en_us&page=reports_overview.html