Loss of SNMP after upgarde ILO2 to 2.33

[testmado662]

Hello,

We got some P4000 ILO 2 and  I've upadted one of them with latest version, 2.33. All of them are currently  in 2.32 and works well.

After ILO Upgrade to 2.33, I loss SNMP. I would like to know if and how can I relaunch SNMP ?

I could relaunch the server and I know that relaunch is mandatory in some ILO upgrade. Currently I can MIB walking with Lefthand but not with server and relaunch ILO SNMP will be easier for us.

Thansk for your Help

[Mohamed_I]

Hi testmado662, Thank you for the query. In most of the cases, a reboot of the Storage node will fix the SNMP Issue.

If you prefer not to reboot the Storage node, you can try to re-enable SNMP using the steps mentioned in the following article

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c04855296

If after following the steps, the same issue is there, then you can try doing a reboot of the Storage Node.

[testmado662 · Accepted solution]

Hi all,

I recover SNMP after a node restart.

Thanks for help