StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: RAID REPAIR STROVIRTUAL 4000

 
SOLVED
Go to solution
Highlighted
Frequent Advisor

RAID REPAIR STROVIRTUAL 4000

Hello,

I found a post on this forum about RAID Repair. The prodedure was posted and it's necessary to admin connect in order to put node into repair mode. https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0112618

Since new LeftHand versions, we can't conect to admin. Can we do it over CMC or only HPE technicals can do it ?

Thanks for your help.

 

 

5 REPLIES 5
Highlighted
HPE Pro
Solution

Re: RAID REPAIR STROVIRTUAL 4000

Hi

Thank you for coming on HPE Community Forums.

I went through the link which was shared and, I suggest you to try with the same as it is mentioned in the link.

https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0112618

If you have any further clarifications, I would suggest you to get in touch with the HPE Technical Support to get this resolved.

Hope this helps.!

Regards
Mahesh202

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Highlighted
Occasional Advisor

Re: RAID REPAIR STROVIRTUAL 4000

Hello  testmado662 .

We need  adminstrator login to place the Node in repair.

If the store is working fine, the node will not go into repair mode from CMC, we need to stop the dbd_store service to force the repair from CLIQ.

Putty into the Node with poert 16022 , you can use CMC login credentials  and ran utility run="servicectl dbd_store stop".

Then from CMC ->r right click on the node, select repair storage system

You can contact HPE support.

Regards

MOHINK


I work for HPE
Highlighted
Frequent Advisor

Re: RAID REPAIR STROVIRTUAL 4000

hello,

Thatnks for the procedure. I think we forget login to node in order to stop Processes.

Regards

Highlighted
Frequent Advisor

Re: RAID REPAIR STROVIRTUAL 4000

hello Mohink,

We can connect as SAN Admin, we don't need to use an HPE root user ?

I know that some operation are only authorized for HPE support.

If our current admin user works, no problem to repair RAID 5.

Regards

Highlighted
Occasional Advisor

Re: RAID REPAIR STROVIRTUAL 4000

SAN Admin credentials will work for the operation suggested


I work for HPE