storage system not ready no device with journal

[PH2]

Hello

I Added a second disk to the first VSA of 2 after that i get the error

storage system not ready no device with journal

[Assen]

Hello PH2,

have you added the vhdd to the correct controller? It shouldn't be on the same controller as the OS disk!

If you have added the vhdd to the correct controller, make shore you have enough RAM for the VSA, in your case 5GB.

If everything is as it should be, i guess something went wrong with adding the vhdd and you would need to reconfigure the raid of the VSA, to fix the issue.

Please check the folowing article on how to put the node in repair mode and reconfigure the raid. It is also valid for VSAs.

https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0112618

BR

Assen

[PH2 · Accepted solution]

I was a config problem in the vsa support helped me and everythink works.

[SimoneVenezia]

hello, i have the same problem. how did you fixed it?

could you tell me what the support did?

[PH2]

HP Logged in on the console of the VSA and they removed some settings. After that i added the disk with no problems.

[SimoneVenezia]

could you try remembering what they removed? im stuck with this problem and im unable to fix it. please help

[PH2]

Do you have support by HP?

[SimoneVenezia]

yes i have, but they are very slow in contacting me. 12h and still no contact