StoreVirtual 3200 13.6 updated - still getting warnings

[EricGarneau]

These are the warnings I'm still getting with our StoreVirtual 3200 SAN.  At what should I be looking to correct the issues ?

EID_ISCSI_TARGET_DATA_ACCESS_STATUS_DEGRADED

Jan 29 4:43:02 pm
System

iSCSI Target 'CMQManagementGroup' Degraded.

EID_ISCSI_AUTH_SERVER_DATA_ACCESS_STATUS_DEGRADED

Feb 6 8:45:31 am
System

'CMQVMW02' is missing session connections to 'SV3200-8C2A72-SC1SV3200-8C2A72-SC1SV3200-8C28F2-SC2SV3200-8C28F2-SC2'.

EID_ISCSI_AUTH_SERVER_DATA_ACCESS_STATUS_DEGRADED

Feb 6 2:32:17 pm
System

'CMQVMW01' is missing session connections to 'SV3200-8C2A72-SC1SV3200-8C2A72-SC1SV3200-8C28F2-SC2SV3200-8C28F2-SC2'.

EID_ISCSI_TRANSPORT_LINK_STATUS_DOWN

Today 4:00:17 pm
Resync

iSCSI link status on 'SV3200-8C28F2-SC2' is DOWN

EID_ISCSI_TRANSPORT_LINK_STATUS_DOWN

Today 4:00:17 pm
Resync

iSCSI link status on 'SV3200-8C28F2-SC2' is DOWN

[k_sudip77]

Check if the host that the alert is referring to is a valid host and connected to the SV3200. 

The iSCSI missing session connections appear when the connection to the server/host and the controller IP address is lost, This can happen if there is no session to the particular controller IP. 

We will need to check the host iSCSI initiator in all the hosts, and verify that it has 4 sessions created,  that is two per controller. If there arent 4 sessions created, then this alert will appear.  You can also try removing the storage completely from the iSCSI initiator and readd them fresh using the VIP and ensure 4 sessions are created. 

We can also try remove the hosts, from the SVMC and readd them, This will reestablish the iSCSI connections. 

We can also try reboot the host, so that will as wll reestablish the connection.