2910al Config

[th0mas0s]

I am trying (and failing) to setup a 2910 switch.

I wish to be able to vlan off the ports but still talk through them. I enclose my hashed config.

Any assistance is gratefully received.

Th0mas0s

[cenk sasmaztin]

Im not correctly understand
exactly what do you want to do

[th0mas0s]

Sorry if I didn't make any sense.

I have 4 vlans

I will be plugging in a new BT router into vlan 172 (ports 5 & 6) but I want to ensure all other vlans except vlan 101 can receive/talk to the BT router.

I have tried with my current config that was attached without success. The switch is a L2/3 switch.

Regards,
Th0mas0s

[th0mas0s]

Ok I worked out why this was not working.

Thank you to cenk sasmaztin who at least responded.

This was due to the vlan's in question being tagged and untagged. I am attaching the final config for anyone to use in the future.

Regards,
th0mas0s

[th0mas0s]

Solution was to remove the tagging from the vlan's in question.