4109GL VLAN setup

[Leonard Slebodnik]

Thanks for your patience with this! As you can see above I entered

ip route 0.0.0.0 0.0.0.0 192.168.1.1

in the switch when I se it up. So I would then need to add the return route to the firewall for each subnet correct? I think i understand now that the Linksys box is not going to know where the 2.X subnet is unless I tell it where to look. Someties it takes me a whiel to catch on! ;)

[Gerhard Roets · Accepted solution]

Perfect :)

[Leonard Slebodnik]

added route back to subnet on internet router.