802.1x snmp traps with 2650

[Nikil Deo]

Hi,
We are setting up 802.1x authentication on a procurve 2650.

Is it possible fo the switch to send an snmp trap when 802.1x succeeds or fails?

We would like to setup a notifcation whenever a failure is logged.
If not possible, is there another way to acheive this functionality?

Thanks

[cenk sasmaztin]

hi Nikil
802.1x operation sucessfully or fail send message on switch log table
you want this log table all info or some info to send trap you can make snmp config on switch and you can use network management program (like procurve manager)


cenk

ftp://ftp.hp.com/pub/networking/software/2600-2800-4100-6108-MgmtConfig-Oct2005-59906023.pdf

[Mohieddin Kharnoub]

Hi

The RADIUS Server's log will be more than enough for such information.

Good Luck !!!