PCM+ error in network map

[J Vesterdahl]

Hi all.
At one place in my network I used to have two 2824 switches connected directly by singlemode fiber. A while ago a 2824 was inserted between the two, it's now a two-hop link.
PCM+ added the two new connections in the network map, but did not remove the old direct link.
Oddly enough, the error is only in the overall network map. The VLAN maps are fine.

PCM+ 2.3 update 5
2824 firmware I.10.43

Any thoughts?

[J Vesterdahl]

Okay - delete device and rediscover did the trick once again.
I deleted the most remote device, and after manual rediscovery, PCM got the map right.

[J Vesterdahl]

Closing