POE - Faulty light flashing RED

[Mark Burbage]

Hi guru's

We have over 30 edge devices (Procurve) around site and recently had a lightning strike. The switches all came back online and are working correctly. On physical inspection some have the POE and Fault LED's flashing RED. The switches are working ok. I have powered them off to see if the error clears but to no avail. They are 2910AL (24 & 48 port) with the latest firmwares installed.

Thanks for any help.

[Trevor Commulynx · Accepted solution]

Warranty Call Straight away. Red PoE means there is an issue delivering Power to those ports.

[Mark Burbage]

Thank You Trevor. I will report the faults and hopefully get some replacement switches.

thank you.