- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Procurve 2900-24G vlan question
Switches, Hubs, and Modems
1753789
Members
7537
Online
108799
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО08-26-2007 10:51 PM
тАО08-26-2007 10:51 PM
Procurve 2900-24G vlan question
Hi,
tired to put some vlan on my new 2900, but cannot get any traffic to route.
If I connect computer to the switch, configure with static ip, but still I cannot get this...
Here is my configuration. Any help on this on?
max-vlans 10
time timezone 120
time daylight-time-rule Western-Europe
web-management ssl
module 1 type J86xxA
module 3 type J90XXA
trunk 24 Trk1 Trunk
ip default-gateway 10.0.48.1
ip routing
snmp-server community "foo" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-4,10-19,21-23,A1-A4
no untagged 5-9,20,Trk1
exit
vlan 48
name "vlan48"
untagged 20,Trk1
ip address 10.0.48.112 255.255.255.0
tagged 1-4
exit
vlan 49
name "vlan49"
untagged 5-9
ip helper-address 10.0.48.16
ip address 10.0.49.1 255.255.255.0
tagged 20,Trk1
exit
vlan 50
name "vlan50"
ip address 10.0.50.1 255.255.255.0
tagged 10-14,20,Trk1
exit
vlan 51
name "vlan51"
ip address 10.0.51.1 255.255.255.0
tagged 15-20,Trk1
exit
no stack
primary-vlan 48
ip route 0.0.0.0 0.0.0.0 10.0.48.1
spanning-tree Trk1 priority 4
password manager
tired to put some vlan on my new 2900, but cannot get any traffic to route.
If I connect computer to the switch, configure with static ip, but still I cannot get this...
Here is my configuration. Any help on this on?
max-vlans 10
time timezone 120
time daylight-time-rule Western-Europe
web-management ssl
module 1 type J86xxA
module 3 type J90XXA
trunk 24 Trk1 Trunk
ip default-gateway 10.0.48.1
ip routing
snmp-server community "foo" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-4,10-19,21-23,A1-A4
no untagged 5-9,20,Trk1
exit
vlan 48
name "vlan48"
untagged 20,Trk1
ip address 10.0.48.112 255.255.255.0
tagged 1-4
exit
vlan 49
name "vlan49"
untagged 5-9
ip helper-address 10.0.48.16
ip address 10.0.49.1 255.255.255.0
tagged 20,Trk1
exit
vlan 50
name "vlan50"
ip address 10.0.50.1 255.255.255.0
tagged 10-14,20,Trk1
exit
vlan 51
name "vlan51"
ip address 10.0.51.1 255.255.255.0
tagged 15-20,Trk1
exit
no stack
primary-vlan 48
ip route 0.0.0.0 0.0.0.0 10.0.48.1
spanning-tree Trk1 priority 4
password manager
3 REPLIES 3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО08-27-2007 06:09 AM
тАО08-27-2007 06:09 AM
Re: Procurve 2900-24G vlan question
Hi
The 2900 is capable of Inter-Vlan routing, but the Vlan IP address won;t be inserted in the routing table until it has one active link.
Execute : Who ip route, and see the output.
If you have all the Vlan's IPs in the routing table, then its a check the gateway of the end user.
Each end user's gateway should be the Vlan IP address on the 2900.
Note: The trunk is a logical link combines 2 or more physical ports on the switch,
And your trunk has one port only.
Good Luck !!!
The 2900 is capable of Inter-Vlan routing, but the Vlan IP address won;t be inserted in the routing table until it has one active link.
Execute : Who ip route, and see the output.
If you have all the Vlan's IPs in the routing table, then its a check the gateway of the end user.
Each end user's gateway should be the Vlan IP address on the 2900.
Note: The trunk is a logical link combines 2 or more physical ports on the switch,
And your trunk has one port only.
Good Luck !!!
Science for Everyone
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-24-2008 09:39 AM
тАО03-24-2008 09:39 AM
Re: Procurve 2900-24G vlan question
i tried executing the "who ip route" on my procurve 2900 and it didn't understand the command...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-24-2008 10:37 AM
тАО03-24-2008 10:37 AM
Re: Procurve 2900-24G vlan question
My mistake, the command is:
Show ip route
Show ip route
Science for Everyone
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP