Switches, Hubs, and Modems
1748148 Members
3538 Online
108758 Solutions
New Discussion юеВ

Re: ProCurve Switch 2510G-24 and SNMP

 
Hajo Kumschlies
Advisor

ProCurve Switch 2510G-24 and SNMP

Hi,

where can I change the Port for my SNMP Traps?
I do not get any traps.

Hajo
43 REPLIES 43
bolli
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Hello Hajo,
have you configure an SNMP-Server?

Connect to the CLI:
configure
snmp-server

here you find any commands you need to configure.

Regards
Hajo Kumschlies
Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Yes,

i├В┬┤ll show you
bolli
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Can you reach the SNMP Server via ping?
Hajo Kumschlies
Advisor

Re: ProCurve Switch 2510G-24 and SNMP

yes,

it├В┬┤s alive
bolli
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

And you have enable snmp and the communitys are the same on the server and on the switch?
Hajo Kumschlies
Advisor

Re: ProCurve Switch 2510G-24 and SNMP

I tested it with the attached settings and tehy are received.
bolli
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Try to enable the mib
bolli
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Sorry. Here is the command
configure
snmp-server mib hpSwitchAuthMIB included
Hajo Kumschlies
Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Hi,

the result:

Invalid input: mib