Switches, Hubs, and Modems
1748287 Members
3248 Online
108761 Solutions
New Discussion юеВ

Re: PXE and dhcp-snooping on 2650 firmware H.10.83

 
SOLVED
Go to solution
zwpe
Occasional Contributor

PXE and dhcp-snooping on 2650 firmware H.10.83

I recently upgraded firmware on our 2650 switches. Old version: H.10.74, new version: H.10.83. Unfortunately PXE boot now fails when dhcp-snooping is activated. It worked fine with H.10.74 Is this a bug or a feature?

Our dhcp server runs on Windows 2003. A Cisco 6500 relays (ip-helper) the dhcp broadcasts.

PXE server (LANDesk) runs on a seperate server.

Debug:
DSNP DHCP DISCOVER: port 1, vid 984, from 18A905-??????, allow: broadcast on untrusted input port to trusted output ports.

DSNP DHCP OFFER: port 50, vid 984, from 00059A-?????? from server-id: 10.B.C.D offered: 10.X.Y.Z lease time 28800 seconds, allow: output port 1.

DSNP DHCP OFFER: port 50, vid 984, from 00059A-?????? from server-id: 10.K.L.M offered: 0.0.0.0, drop: illegal yiaddr: 0.0.0.0.
(Last line is the PXE server)

With H.10.74 yiaddr 0.0.0.0 isn't dropped.

Should i revert to the previous release or is it a configuration issue?
4 REPLIES 4
Solution

Re: PXE and dhcp-snooping on 2650 firmware H.10.83

Revert to the previous release, this should be fixed in a later release. We've already reported the problem and received a POF build for the 2600 series.

Request H.10.85 from HP support if you want to keep the DHCP-Snooping enhancents but want this issue fixed.
zwpe
Occasional Contributor

Re: PXE and dhcp-snooping on 2650 firmware H.10.83

Thanx for your reply. I'll revert back to H.10.74 and wait for an updated firmware. Case closed.
zwpe
Occasional Contributor

Re: PXE and dhcp-snooping on 2650 firmware H.10.83

Revert back to H.10.74 and wait for an updated firmware.
jmglass
Occasional Advisor

Re: PXE and dhcp-snooping on 2650 firmware H.10.83

Greetings,

I believe I am seeing the same on 2824 running version I.10.77, did not see on version I.10.73. Same suggestion, roll back to older version until fixed in later?
Anyone else seeing this on 2824, J4903A switches?

W 01/22/10 03:41:34 dhcp-snoop: backplane: Drop offer from xxx.xx.xxx.xxx of 0.0.0.0; address is illegal.
W 01/22/10 03:41:34 dhcp-snoop: backplane: Ceasing illegal lease information logs for 5m.

thanks!!
jim