Setting Community with mixed case on VC switch

[Rob Buxton]

Hi All,
Just want to know if others have seen the following or maybe know of a fix.
We have a c3000 Blade Chassis with a Virtual Connect Ethernet switch (v2.31 FW).
Under SNMP I can set the Community name to our standard mixed case name. But when I add a Trap destination using the mixed case community name it goes red and says the community name must be alphanumeric.
I've used this mixed case name everywhere else with no problems so I'm suspecting a bug in the FW.

[Sameer_Nirmal · Accepted solution]

The issue has been fixed in the VC v2.32

Per the release notes of v2.32

"Resolved an issue for VCM GUI that would not allow use of upper case letters to define SNMP community strings."

[Rob Buxton]

Looks like I need to upgrade to 2.32.