Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

setup trunk beween 2848 and HP GbE2c Ethernet Blade Switch

 
Highlighted
New Member

setup trunk beween 2848 and HP GbE2c Ethernet Blade Switch

What is the command syntax to setup a trunk between GbE2c Ethernet and a 2828?
"trunk 45-46 Trk1 trunk" is the command for the 2828 I have STP enabled on the 2848 switch.
Hope somebody give me some input.
1 REPLY 1
Highlighted
Trusted Contributor

Re: setup trunk beween 2848 and HP GbE2c Ethernet Blade Switch

Take a look at the section titled "Ports and Trunking" in the GbE2c Application Guide (Doc Part number: 418119-003). Here is the URL: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00701973/c00701973.pdf

There are examples on pg 33 for CLI syntax. The STP rules will change when you enable the trunk group on the GbE2c.

Note: There will be some STP considerations based on how you have deployed STP on the ProCurve and the rest of your network.
---------------------------------------------
I work for HP, but my posts and replies are my own.