Command replaces spanning tree porfast on HP Switches 2530

[ITLIMA]

I always use Cisco, now we have migrated HP2530, these are a great switches, however I do not found this command,  someone knows the command equilant   "spanning tree porfast"   applied in each port for the HP Switches 2530. Thanks.

[parnassus]

According to what is reported by Aruba ArubaOS-Switch, Comware (v5/v7) and Cisco IOS Reference Guide version 3.3 (at page 413) the equivalent of Cisco spanning tree portfast command applied to a specific port is, on ArubaOS-Switch, the following:

ArubaOS-Switch(config)# spanning-tree portnumber admin-edge-port

where portnumber is the relevant Port number on the Aruba Switch.

On Comware (v5/v7) based Switches the equivalent is (once into the relevant Interface context) stp edged-port enabled.

[ITLIMA]

Thanks  for your help, I have the command with your help

spanning-tree ethernet  1-48 admin-edge-port

Regards.