Disk issue

[shikhar_1]

Hi,

I have facing issue is that i have configured rx2660 server with six sas drives attached to it.
Now when i installed OS on that it is showing only two disks. One disk for OS and other disk is showing combined of all rest five disks.
I am not understanding why five six has combined and showing it as a single disk.

H/W Scan: Thu Jan 27 15:45:21 2011
Path(s) Device File(s) Use VG Names Paths Size(GB) Descrip
--------------------------------------------------------------------------------
0/3/0/0/0/0.0.0 /dev/dsk/c0t0d0 LVM vg00 1 136.70 HP
0/3/0/0/0/0.0.1 /dev/dsk/c0t0d1 unused - 1 546.81 HP
--------------------------------------


# ioscan -funC disk
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
disk 0 0/3/0/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
/dev/dsk/c0t0d0s1 /dev/rdsk/c0t0d0s1
/dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3
disk 1 0/3/0/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 4 255/1/0.0.0 sdisk CLAIMED DEVICE TEAC DVD-ROM DW-224EV
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0

[Torsten.]

You have a martarray controller installed, so you see logical drives (LUNs).


From ioscan get the /dev/ciss file and do

# sautil /dev/ciss_

and

# saconfig /dev/ciss_

to see the configuration details.

[shikhar_1]

Hi,

I am getting that /dev/ciss in ioscan command.

See the below o/p.

0/3/0/0/0/0 ext_bus PCIe SAS SmartArray P400 RAID Controller
0/3/0/0/0/0.0 target
0/3/0/0/0/0.0.0 disk HP LOGICAL VOLUME
0/3/0/0/0/0.0.1 disk HP LOGICAL VOLUME

[Torsten.]

You say you are an expert in this area ...


# ioscan -fn


and you get sometging like

/dev/ciss1

now do

# sautil /dev/ciss1

and

# saconfig /dev/ciss1


I assume you have a RAID1 for the boot LUN and a RAID5 for the remaining disks.





No disk issue at all.

[shikhar_1]

Hi,

I have checked its showing this

---- LOGICAL DRIVE SUMMARY ---------------------------------------------------

# RAID Size Status

0 1+0 139979 MB OK
1 0 559929 MB OK

It means my root disk is mirrored and other disk are raid 0.
But my root disk is not mirrored.
Is there any way to split all my disks separate?

[Torsten.]

Based on this very little piece of information you provided it looks like the boot disk is a RAID1 (mirrored).


A smartarray cannot allow access to the physical disks directly, but you can create several RAIDs (RAID1 or 5 or even 0) and logical drives within.

[Jorge Pons]

Hi

Like Torsten said, you have several disk plugged into smartarray. this smartarray is configured in two volumes, one of this is in RAID1, for O.S, and the other one could be in RAID5, for data.
In case of the first one volume, the Smartarray present you like only one disk, and you think is not in mirror.

Regards, Jorge

[Torsten. · Accepted solution]

Please post the complete output of

# sautil /dev/ciss1

and

# saconfig /dev/ciss1

because we need some more details.

[shikhar_1]

Hi,

Pls find as the attached for sautil /dev/ciss0 output.

[Torsten.]

Now you can see t clearly, disks in bay 3 and 4 are mirrored; disks in bays 5,6,7 and 8 are forming a RAID0.

You can work with saconfig to delete the RAID0 and create something different.