GFS Question

[Pattabhi]

Hi All,

I have just enabled quotas on one of my GFS file system, but when i run the
gfs_quota list -f /GCSHome connamd it gives me the output of the command and gets stuck, meaning it does not return back to the prompt. i have to press a ctrl C to get back to the prompt. and idea what might be happenng here??

Regards,
Pattabhi Raman

[Stuart Browne]

'strace' is your friend.

See what library calls get it to get hung up.

Beyond that, I'm not much help though ;)

What kernels and GFS versions are you using btw?

[Pattabhi]

Sorry i forgot to mention....

I did run strace and the only thing that happens is

ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88
ioctl(3, 0x472d, 0x7fbfffe700) = 88

kernel 2.6.9-42.0.10.ELsmp
gfs gfs_quota 6.1.6 (built May 9 2006 17:48:46)

[Steven E. Protter]

Shalom,

I'd suggest next making sure the latest RHCS/GFS patches are in via up2date.

rpm -qa | grep ^cman

This could be a mis-match between the kernel and the GFS suite, or it could be a bad application provided by Red Hat (heaven forfend).

I have a diagnostic question for you. Does the GFS filesystem work right at all? Can it mount? Can you read/write data to it? I think the answer is probably yes.

Is the clvmd daemon running on both all nodes?

SEP

[Pattabhi]

All,

We have a solution for the issue. Please find the link below for the solution.

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=210362

Regards,
Pattabhi Raman