- Community Home
- >
- Servers and Operating Systems
- >
- Operating Systems
- >
- Operating System - HP-UX
- >
- Re: how to map ioscan hadrware path to PCI slot nu...
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-16-2013 04:44 AM
05-16-2013 04:44 AM
how to map ioscan hadrware path to PCI slot number.
How to find the PCI slot numbers, like which HBA card is attached in which PCI slot from ioscan command output.
I have tried, ioscan -P physical_location, orlad -q and rad -q... but no luck. All these commands are not waorking i n my server. RX2800i2 is the BOX.
Any idea.. please
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-16-2013 05:18 AM
05-16-2013 05:18 AM
Re: how to map ioscan hadrware path to PCI slot number.
There are 2 or 3 slot riser cards.
For 3 slot cards:
primary (left from rear)
top 0/0/0/9/0/0
middle 0/0/0/8/0/0
bottom 0/0/0/7/0/0
secondary:
0/0/0/3/0/0
0/0/0/5/0/0
0/0/0/6/0/0
for 2 slot cards:
primary
top 0/0/0/9/0/0
middle 0/0/0/7/0/0
secondary
top 0/0/0/3/0/0
middle 0/0/0/5/0/0
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-16-2013 05:34 AM
05-16-2013 05:34 AM
Re: how to map ioscan hadrware path to PCI slot number.
Thanks a lot Torsten...
let me post my ioscan output over here.. Can you guide me which HBA card is in which slots
dmocoi :/home# ioscan -fnC fc
Class I H/W Path Driver S/W State H/W Type Description
======================================================================
fc 0 0/0/0/3/0/0/0/5/0/0/0 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
/dev/fclp0
fc 1 0/0/0/3/0/0/0/5/0/0/1 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
/dev/fclp1
fc 2 0/0/0/7/0/0/0/5/0/0/0 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
/dev/fclp2
fc 3 0/0/0/7/0/0/0/5/0/0/1 fclp CLAIMED INTERFACE HP AT094-60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
/dev/fclp3
fc 4 0/0/0/9/0/0/0 fclp CLAIMED INTERFACE HP AH403A 8Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp4
fc 5 0/0/0/9/0/0/1 fclp CLAIMED INTERFACE HP AH403A 8Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp5