cancel
Showing results for 
Search instead for 
Did you mean: 

itanium rx6600 and sas 1068

 
SOLVED
Go to solution
Highlighted
Regular Advisor

itanium rx6600 and sas 1068

Hi

I am stumped. I have been asked to install a system.

What utility do i use to setup the raid controller. For the hardware raid.

There is no f8 at boot like the forums suggest.

It will have hp-ux 11.31 on.

what am i missing?
6 REPLIES 6
Highlighted
Honored Contributor

Re: itanium rx6600 and sas 1068

Hi,

you can make raid configuration in the efi shell. look at drvcfg command.

if hp-ux is up you can use sasmgr command.
Computers have lots of memory but no imagination
Highlighted
Regular Advisor

Re: itanium rx6600 and sas 1068

hi no hp ux installed on it at all had red hat.

I have removed the two disks and inserted two new Hdisks.

I now need to create the mirror and install Hp -Ux.

But i must alos have the ability to recover the old raid as well. and be able to boot the two original disks.

Highlighted
Regular Advisor

Re: itanium rx6600 and sas 1068

I see drvcfg -s brings up something i can work with
Highlighted
Honored Contributor

Re: itanium rx6600 and sas 1068

Hi,

look at page 98

https://www.filibeto.org/unix/hp-ux/lib/hardware/systems/rx6600/installation-AB464-9001A.pdf
Computers have lots of memory but no imagination
Highlighted
Acclaimed Contributor
Solution

Re: itanium rx6600 and sas 1068

See

http://h30499.www3.hp.com/t5/Integrity-Servers/RAID1-configure/m-p/5275853#M10902

There is the link to the step by step instructions.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Regular Advisor

Re: itanium rx6600 and sas 1068

Thanks to all for prompt response.

DRVCFG -s helped me and from there figured it out with Torstens documentatoin