Olrad and Configuration in one RX

[Carme Torca]

Hi,

I would like to know if the targets that are Pwr: Off and Occu: No are free.
In this server I have the slot 1 and 2 whith this configuration and I would like to buy one target of PCI/PCI-X 1000Base-T Dual-port Adapter to put in it.

Is this possible, this slots are free?

Thanks a lot of,
Carmen.


#olrad -q
Driver(s)
Capable
Slot Path Bus Max Spd Pwr Occu Susp OLAR OLD Max Mode
Num Spd Mode
0-0-0-1 0/0/8/1 140 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-2 0/0/10/1 169 133 133 Off No N/A N/A N/A PCI-X PCI-X
0-0-0-3 0/0/12/1 198 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-4 0/0/14/1 227 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-5 0/0/6/1 112 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-6 0/0/4/1 84 266 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-7 0/0/2/1 56 133 133 On Yes No Yes N/A PCI-X PCI-X
0-0-0-8 0/0/1/1 28 133 133 On Yes No Yes N/A PCI-X PCI-X

[Torsten.]

No idea what server you have, but if the power of the slots if off most likely the slots are empty.

[Torsten. · Accepted solution]

The table is hard to read (bad format when posted), but it says

Power Off
Occupied No

So they are empty.