System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

rh4 cluster fencing ilo or ipmi itanium and superdome

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

rh4 cluster fencing ilo or ipmi itanium and superdome

I try to use ilo fencing on two rx3600 Itanium based server with RH Cluster Suite and RH4AS, but it seems does not work; also IPMI interface seems not work; is there a solution to correct fence on HP Itanium cluster node ? And on Superdome that hasn't ILO what kind of fencing is possible to use?
3 REPLIES 3
Highlighted
Honored Contributor

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

If your cluster is connected to a SAN, you can use fence brocade to disable the sanswitch port to which the servers are connected.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Highlighted
Occasional Contributor

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

I'm not lucky; i have cisco mds 9000 san and not brocade san....
Highlighted
Honored Contributor
Solution

Re: rh4 cluster fencing ilo or ipmi itanium and superdome

In Red Hat Cluster Suite 4 U4, you have the option of configure a quorum disk instead of a fence device, see:

https://www.redhat.com/docs/manuals/csgfs/release-notes/CS_4-RHEL4U4-relnotes.txt
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?