Suse Enterprise 10 HDD Information?

[Michael Hoberg]

Hello,

i would like to know of its possible to get information of the physical drives installed and there status without installing the PSP?

Problem is that a customer has reported a failed hard drive but don't have any hp agents installed. Only information he could give me was "POST ERROR 1787 and 1783" from the IML.

I am now Suse Administrator...so i ask here for help :)

Thank you.

[Michael Leu]

You don't need the whole PSP to get information out of the SmartArray controller, hpacucli.rpm and/or hpaducli.rpm should be enough.

HP Array Configuration Utility CLI for Linux:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3884098&swItem=MTX-4d7c7820b1b948a0a79ec44be4&prodNameId=3884099&swEnvOID=2078&swLang=8&taskId=135&mode=4&idx=0

HP Array Diagnostics Utility (CLI) for Linux:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3884098&prodNameId=3884099&swEnvOID=2078&swLang=8&mode=2&taskId=135&swItem=MTX-5f2c98786eab444e9c1ff709dd